Qubino - Z-wave+ Mini Dimmer ZMNHHD1

Qubino Mini Dimmer ZMNHHD1

25% smaller than any other wireless dimmer on the market

Smarten up your conventional lighting and control your lights remotely with Qubino Mini Dimmer. Its small size allows an easy and fast installation. 

Dim all types of dimmable bulbs

Works without neutral

Mini Dimmer does not require a neutral wire (N). It works in a 2-Wire or 3-Wire configuration system. 

No minimum load required - works with 1W bulbs and above

Connect and remotely control low wattage bulbs. No minimum load required. 

Easy installation

Its small size allows it to fit in the smallest, most shallow and most crowded flush mounting boxes. 

LED Signalisation

Mini Dimmer has an RGB LED signalisation. You can easily recognise if the Mini Dimmer is included or excluded from the Z-Wave network. You can also be aware in case of overload or overheating and when the calibration is in progress.  

Functions

• Qubino Mini Dimmer is the smallest wireless dimmer worldwide
• It can be installed in a 2-Wire system - no neutral line required
• It can also be installed in a 3-Wire system - with a neutral line
• Thanks to its small size, it fits in even the smallest, most shallow and most crowded electrical boxes
• It fits in any flush mounting box worldwide
• You can connect and remotely control your 1W bulbs and above - no minimum load required
• You can dim all types of dimmable bulbs - incandescent, halogen, LED, LED strip light, fluorescent
• It has LED signalisation to easily recognise if Mini Dimmer is excluded or included from the network. You can also be aware in case of overload overheating and when the calibration is in progress
• Extremely low energy consumption: less than 0.4W​​

​

Technical specification

• Power supply: 110 - 240 VAC 50Hz
• Rated load current of AC output: 0.85A
• Output circuit power of AC/DC output (resistive load): 200W
• Power measurement accuracy (2-Wire): ± 10%
• Power measurement accuracy (3-Wire): ± 2%
• Operation temperature: -10 - +40°C
• Distance: up to 30m indoors
• Dimensions (L x H x P): 38mm x 33.5mm x 15.5mm
• Weight: 28g
• Electricity consumption: 0.4W
• Mounting: Ø ≥ 60 mm or 2M
• Switching: MOSFET (trailing edge)
• Z-Wave repeater: yes