Qubino - DIN Rail 3-phase energy meter module (3-phase Smart Meter)

This Z-Wave+ module is designed to measure energy in a three-phase electrical installation up to 65A. It uses fast sampling of voltage and current signals to directly measure the energy in a 4 wire circuit. A built-in microprocessor calculates the energy, power and power factor of the signals measured.

Fitted with an LCD screen to display the measurements, this module can also send the various results measured to your Z-Wave home automation controller. In addition, it acts as a repeater to improve the range and stability of your Z-Wave network.

The module can also control electrical devices (on/off switch) by adding the following external relays:

• Bistable switch (32A) BICOM432-40-WM1, controlled by the optical communication port (IR)
• Contactor (32A) IKA232-20/230 V controlled by the output on terminal 5

Finally, it should be noted that the QUBINO brand has set itself demanding quality and sustainability limits: for this reason they have selected high-performance components. The numerous quality control tests carried out on the module ensure maximum durability (tough enough to operate at temperatures ranging from -10°C to 40°C).

Features

• Measures overall consumption of a 3-phase electrical installation
• Measures the power consumption of a 3-phase electrical device (heat pump, induction oven, etc)
• Provides data on the voltage, current, active, reactive and apparent power, and the power factor
• Integrated 500 series Z-Wave chip (Z-Wave+)
• Communication 250% faster compared to standard Z-Wave devices
• LCD display (7+1 digit, 100 Wh resolution)
• Operating temperature -10 to 40˚C
• Optical communication port (IR) for external relay BICOM432-40-WM1
• Output to connect an external contactor IKA232-20/230 V
• Installs easily in the distribution board

Technical Specifications

• Power supply: 3x230V/400V
• Consumption: <8VA
• Basic current (Iref): 5 A
• Maximum current (Imax): 65 A
• Minimum current (Imin): 0.25 A
• Starting current: 20 mA
• Accuracy:
  • Active energy and power:
    • Standard EN 62053-21: class 1
    • Standard EN 50470-3: class B
  • Reactive energy:
    • Standard EN 62053-23: class 2
• Radio frequency: 868.42MHz, Z-Wave
• Range: up to 30m indoors (depending on surrounding material)
• Operating temperature: -10 ~ 55°C
• IP protection: IP20
• Dimensions (L x H x D): 84 x 65 x 53.6mm
• Weight: 220g
• Certifications: CE, RoHs