The Stick Home Assistant Connect ZBT-1 is the easiest way to add Zigbee support to your Home Assistant instance and make it Matter ready. Note: The Connect ZBT-1 is the new model of the SkyConnect stick. Official supplier

The most efficient Z-Wave adapter for Home Assistant. Precisely tuned antenna for maximum range, latest generation Z-Wave 800 chipset, Long Range compatible. Plug-and-play installation and simplified migration. Elegant candlelight-shaped design that blends seamlessly into your decor. Official Supplier

Aqara Hub M100 (HM-G02D), Matter hub for Aqara and third-party devices, local automation, Thread and Zigbee

RaspBee is a universal ZigBee gateway for Raspberry, which enables many Zigbee products to be combined. RaspBee can function without the Cloud or the internet. You keep all your data locally at home.  

All-new 800 series Z-Wave long-range radio USB key: incredible signal, ultra-secure and fast network!

The SMLIGHT SLZB-06 is a Zigbee 3.0 to Ethernet, PoE, USB or WiFi adapter designed to work with software systems such as Zigbee2MQTT and Home Assistant ZHA. It is particularly recommended for Zigbee2MQTT users. Official supplier

ConBee II is a universal ZigBee gateway, which enables many Zigbee products to be combined. ConBee can function without the Cloud or the internet. You keep all your data locally at home.  

EnOcean USB controller allowing you to connect any compatible computer or home automation controller to EnOcean technology.  The USB310 controller is also equipped with an SMA connector that can accommodate an antenna.

The SMLIGHT SLZB-06M is a Zigbee 3.0 to Ethernet, PoE, USB or WiFi adapter designed to work with software systems such as Zigbee2MQTT and Home Assistant ZHA. Official supplier

The SMLIGHT SLZB-MR1U is an intelligent LAN adapter that allows you to connect and manage remote USB devices while integrating Zigbee 3.0, Thread, Wi-Fi, and Bluetooth protocols, offering a modular and complete solution for advanced smart home installations. It builds on the solid foundation of the SLZB-MR1 by...

The SLZB-MR1 is an adapter that integrates the CC2652P7 and EFR32MG21 chips, enabling simultaneous management of Zigbee and Matter-over-Thread networks. Official supplier

The SMLIGHT SLZB-06p10 is a versatile Zigbee adapter designed to connect Zigbee devices to Ethernet, USB, and WiFi networks. Optimized for smart home environments, this adapter supports Zigbee2MQTT and Home Assistant (ZHA), providing an ideal solution for both professional and home IoT installations. Multi-connectivity : Easily switch between Ethernet, USB,...

The RFXCOM RFX-433 interface will allow you to increase the RF 433MHz reception and transmission capabilities of your home automation system. Model with a secure microcontroller for managing bidirectional motors.

SLZB-MR3 is a Zigbee and Matter Over Thread dongle via Ethernet POE with 2 chipsets CC2674P10 + EFR32MG24 compatible with Zigbee2Mqtt and Home Assistant.

SMLIGHT SLZB-06Mg24 is an adapter designed to integrate your Zigbee 3.0 devices into your network via Ethernet, WiFi, or USB connections. Official supplier

The Zooz ZSE70 outdoor motion sensor can be used with a compatible hub to automate lights, sirens, or even sprinklers to scare off an intruder.

The RaZberry 7 Pro from Z-Wave.Me is a daughter board for the Raspberry Pi that turns it into a Z-Wave controller. Model with external antenna.

The PiZiGate connected to your Rapsberry Pi allows you to integrate your ZigBee compatible objects into your home automation environment.  

The KNX IP Interface 731 is an interface between IP and KNX and can be used as programming interface for ETS® Software.

GCE Electronics - Calibration kit for pH probe. Essential for accurate measurements with the x200pH

Allows to control io-homecontrol® products from a non io-homecontrol® product. Compatible for example with Lifedomus, HomeAssistant, Jeedom, etc.

EnOcean-USB-Controller, mit dem Sie jeden kompatiblen Computer oder Heimautomatisierungscontroller mit der EnOcean-Welt verbinden können. Modell mit einem SMA-Anschluss für eine externe Antenne ausgestattet. Wird mit einer 868-Mhz-Antenne geliefert.

Energio is the only device you need to monitor your building's energy consumption. Simply install, connect and commission it to collect all the information from the building's energy meters and make it available on the Smarthome SA solution cockpit.

Z-Uno Shield is a multifunctional DIN-rail smart home device based on Z-Uno. It implements most useful features of Z-Uno and requires no soldering and no programming.

The KNX IP Router 752 secure enables the secure forwarding (routing) of telegrams between different lines over a LAN (IP, Ethernet) as a fast backbone.

The KNX Modbus TCP Gateway 716 is a compact Gateway between KNX TP and Modbus TCP with 250 freely configurable data points.

Z-Uno 2 is an easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired...

The ZiGate-DIN allows you to interface your ZigBee® compatible objects to your computer or home automation box.