The FGD-212 dimmer micromodule gives you remote control over a table, standard or ceiling lamp, while maintaining your existing switch.

The FGS-213 micromodule Single Switch 2 allows you to remotely control lighting or an appliance while keeping your existing switch. 

 The FGS-224 micro-module switch lets you control two lamps or two devices from a distance.

The FGS-223 micromodule Double Switch 2 allows you to remotely control two lamps or two devices remotly while keeping your existing switch.

Control your lamps and devices from a distance thanks to the FGS-214 micro-module by Fibaro.

RGB/RGBW Controller (Red, Green, Blue, White) Z-wave compatible with analog input sensors (FIBARO RGBW Controller 2). 

Z-Wave ON/OFF relay module Z-Wave+ with built-in energy meter - 1x2300W

Fibaro Smart Implant de Fibaro improves your equipment and makes it intelligent. 

The NodOn in-wall module can be controlled through an EnOcean compliant home automation system or directly through other EnOcean products.

  25% smaller than any other wireless dimmer on the market Smarten up your conventional lighting and control your lights remotely with Qubino Mini Dimmer. Its small size allows an easy and fast installation. 

Mounted behind your existing wired switch or on the ceiling, the NodOn in-wall module makes your installation intelligent (lighting, heating, electrical appliances, etc...) with simplicity.

The Shelly RGBW 2 is a WiFi dimmer with 4 outputs (red, green, blue, white) to drive LED strips, 12/24V LED lamps, up to 288W (total power of the 4 channels).   Official Shelly importer  

Ideal for remotely controlling electrical equipment

Retrofit your shutters and control it anywhere in your home

Z-Wave+ universal dimmer module with a standard 0-10V outlet and a multifunction inlet.

The IZYMO ON-OFF receiver io transforms any wired lighting (ceiling lamp, wall lamp...) or wired home equipment up to 10A into a smart one.

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

Enables the replacement or addition of remote controls on an existing motor or electric strike Compatible with all garage door motor, gate or electric strike brands

2 favourite roller shutter positions can be saved Feedback of the position of the roller shutter via a control panel or remotely Optimising the building’s energy effi ciency as no work is required for installation Very low energy consumption

Turn the lights on with your foot with this EnOcean foot pedal to avoid anyone touching wall switches and therefore having to disinfect them.

Compatible with all types of lighting (LED, compact fluorescent, halogen, etc.) Ideal for adding an additional control to lighting Allows the use of the same model of switch that already exists Allows the establishment of a time program and the remote control of lighting if it is connected to TYDOM

Operate the lighting of large rooms or corridors and exteriors thanks to this dual output module Compatible with the connected home application Tydom and Lifedomus  

The Omnio flush mounted multi universal dimmer 1-channel UPD230/10 with extension input is a device for dimming LED luminaires and other electrical loads. 

The Omnio flush mounted multi switching actuator 1-channel UPS230/10 is a device for switching electrical loads. Its potential free output is able to be controlled by up to 50 Omnio radio transmitters.