OMNIO - Switching actuator 1-channel UPS230/10
CHF149.00
Tax included
The Omnio flush mounted multi switching actuator 1-channel UPS230/10 is a device for switching electrical loads. Its potential free output is able to be controlled by up to 50 Omnio radio transmitters.
Expert advice for over 14 years
Ordered before 5:00 p.m. = delivered within 24:00 p.m.
Official supplier chosen byover 60 manufacturers
Presentation
The Omnio flush mounted multi switching actuator 1-channel UPS230/10 is a device for switching electrical loads. Its potential free output is able to be controlled by up to 50 Omnio radio transmitters. Each transmitter can be programmed with one of over twenty different functions, for example switch on, switch off, staircase light, sequential push-button, step-switch (AW20), timer (AW23/24/25), window and sliding door surveillance, programmable scenes and presence simulation.
These functions can also be assigned to a conventional push-button or a switch connected to the extension input. Bidirectional communication, EEP D2-01-01. ARCO ready (AWAG Remote Commissioning).
In addition, this actuator can be used as repeater in case of range issues. Suitable for flush mounted sockets.
3110000
1 Item
Data sheet
- Use
- Fixture Control
Lighting Control - Type
- Module
- Function
- Actuator
- Protocol
- EnOcean
Specific References
No customer reviews for the moment.
-
Frequently purchased together
-
You might also like
The Omnio flush mounted multi switching actuator 1-channel UPS230/10 is a device for switching electrical loads. Its potential free output is able to be controlled by up to 50 Omnio radio transmitters.