SR-ZG9101SAC-HP-Switch-2CH is an innovative two-output module with ZigBee control interface. This Zigbee module is designed with two inputs and two 100-240VAC outputs accepting a maximum load of 1170W per channel for halogen and incandescent lamps, and 390W per channel for LED lamps. This ZigBee ON/OFF module supports both resistive and capacitive loads, and provides on/off control of connected loads.
This switch is controllable from a ZigBee gateway interface or remote controls that are added to the network and linked to the switch.
It is based on the Zigbee 3.0 protocol and can be linked and controlled by up to 30 Zigbee remote controls supporting Zigbee Light Link via Touchlink. It also supports the new Zigbee Green Power feature and can link to and be controlled by up to 20 Zigbee Green Power switches directly without a Zigbee hub or gateway.
FUNCTIONS
Dual output ZigBee module based on the latest ZigBee 3.0 protocol
Supports resistive and capacitive loads
2 channel output, maximum load 5.1A per channel
Input and output with screw terminals, safe and reliable
Allows ON/OFF control of connected loads
Supports Touchlink commissioning
Can be coupled directly to compatible ZigBee remote control via Touchlink without coordinator
Supports self-training Zigbee network without coordinator and adds other devices to the network
Supports search and link mode to link a ZigBee remote
Supports Zigbee Green Power and can link up to 20 Green Power switches
Compatible with ZigBee universal gateways
Can be controlled by push switches (both channels can be controlled separately)
Active power and energy measurement functionality
Mini size, easy to install in a standard wall box
Overcurrent protection
TECHNICAL SPECIFICATIONS
Power supply: 100-240VAC
Output current:
Resistive load: 5.1A/channel
Capacitive load : 1,7A/channel
Supported loads:
LED lamps with transformers: 390W
LED drivers: 390W
Incandescent lighting, HV halogen lamps: 1170W
Low voltage halogen lighting with electronic transformers: 390W