Wireless device used to dim your connected lighting Compatible with lighting dimmer solutions (LED and halogen) Create lighting ambiances according to your lifestyle Installed behind the switch without any major work required Consumes very little energy This home automation solution makes your connected lighting part of your Tydom...

The ZBMINI-L ZIGBEE SONOFF neutral-free switch micromodule offers the possibility of controlling a device/lighting of your home.

The SONOFF WIFI micro switch module offers the possibility to control a device/lighting in your home.

Controlled return Z-Wave ON/OFF relay module...

The IZYMO ON-OFF receiver io transforms any wired lighting (ceiling lamp, wall lamp...) or wired home equipment up to 10A into a smart one.

Improved comfort, while avoiding risks of breaking with optional wind sensor Remote control of angle of slats using a remote control or the TYDOM application

10 Amp On/Off receiver + timer Suitable for public buildings, thanks to the various functions Warns users that the light is about to go out in a room, passageway, staircase, etc. Recommended for controlling an air vent in the toilet or bathroom, when lasting presence is detected

Compatible with all types of lighting (LED, compact fluorescent, halogen, etc.) Ideal for adding an additional control to lighting Allows the use of the same model of switch that already exists Allows the establishment of a time program and the remote control of lighting if it is connected to TYDOM

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

2 favourite roller shutter positions can be saved Feedback of the position of the roller shutter via a control panel or remotely Optimising the building’s energy effi ciency as no work is required for installation Very low energy consumption

HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor Input for External switch control Z-Wave Plus v2

Remote control for roller shutter groups with Silent mode and lighting control

Z-Wave Touch Panel Switch, 3 channels. TPS03 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Three relay channels version

The SONOFF smart switch offers the possibility to control a heavy load device in your home and measure its energy consumption.

Operate the lighting of large rooms or corridors and exteriors thanks to this dual output module Compatible with the connected home application Tydom and Lifedomus  

The TYXIA 2600 can control the lighting, lighting dimming, roller shutters, control systems and scenarios. It is compatible with the following control types: Single or double switch. Single or double push-button. 3-way roller shutter switch.

Z-Wave Touch Panel Switch, 1 channels. TPS01 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. One relay channel version

Dedicated to electric pilot wire radiators, the SIN-2-FP-01 EnOcean Module makes them connected and automates heating management to save energy.

Wireless device for connected-lighting dimmer Compatible with the lighting dimmer or dimmer bulbs (LED and halogen) Allows you to create lighting ambiances suited to your lifestyle Existing devices are kept, installation behind the switch with minimum work Energy-efficient modules

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 1-channel wet WS-NASS-103-RW is a battery-less and maintenance-free transmitter including a push-button fitted in a cover of the switch and socket line “robusto” of the company Hager AG. A variety of different printed inlays (blank, doorbell symbol, light symbol) come with the delivery.

Centralised control of outdoor control systems and lighting Easy to carry around thanks to its pocket size and its key ring fastener Impact resistant for daily use

Easy to carry around thanks to its pocket size and its key ring fastener Centralised control of outdoor control systems and lighting Impact resistant for daily use

Receiver 1 16 amp output - one way Easy to install

Light dimmer X3D/DALI receiver Possibility to control up to 15 lights with one command Control of the brightness variation range

Wireless repeater Perfect for large dwellings or offices

Micromodule receiver dry contact 10 A on/off output + X3D timer Suitable for public buildings, thanks to the various functions Warns users that the light is about to go out in a room, passageway, staircase, etc. Recommended for controlling an air vent in the toilet or bathroom, when lasting presence is detected

EnOcean wall transmitter and switching actuator with power measurement.

The Omnio flush mounted multi universal dimmer 1-channel UPD230/10 with extension input is a device for dimming LED luminaires and other electrical loads.