Presentation
The Sigma Designs UZB is a Z-Wave USB controller based on the new SoC SD3503 chipset. It therefore benefits from the improvements related to Z-Wave Plus.
This controller is connected to a USB port on your computer and thus makes it possible to communicate with your Z-Wave network. You will therefore be able to control your modules from your computer. It is also possible to connect it directly to a compatible home automation. It will then enable your box to become compatible with Z-Wave protocol.
The UZB is powered by the USB port and is fitted with an integrated helical antenna which is specifically designed for Z-Wave.
The UZB uses the Z-Wave API, which makes it compatible with most home automation software.
Features
- Connect your Z-Wave network to your computer
- Check your Z-Wave modules with your computer
- Two-way communication
- Z-Wave Plus technology
- Helical antenna to optimise radio range
- Firmware upgradable
- Compatible with several home automation software programs
- Compatible with different home automation controllers available on the market
Technical Characteristics
- Type of module: Z-Wave controller
- Interface: USB
- Colour: White
- Power supply: Via USB
- Chipset: SD3503
- Flash memory: 2Mo
- Frequency: 868.42MHz
- Range: up to 50 m
- RF receiver sensitivity:
- 9.6kbps: -96dBm
- 40kbps: -93dBm
- 100kbps: -88dBm
- Transmitted power: +1.5 dBm
- Dimensions: 58mm x 18mm x 10mm
- Compatible systems: Windows, Linux, Mac OS X
Specifications
| Type | Accessory Gateways/Antennas |
|---|---|
| Gateway compatibility | Somfy Tahoma - fully compatible |
| Protocol | Z-Wave Serie 500 |
Guides
Sigma Designs - Datasheet_EN_en
-
Frequently purchased together
-
You might also like