MDT - Switch Actuator 1-fold, Flush mounted, 230VAC, 16A
CHF115.50
Tax included
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.
Expert advice for over 14 years
Ordered before 5:00 p.m. = delivered within 24:00 p.m.
Official supplier chosen byover 60 manufacturers
description
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.
If the bus voltage fails, all outputs hold their current position. After bus voltage failure or recovery the relay position is
selected in dependence on the parameterization (AKK-01UP.03).
Function
- Function extension
- NO and NC contact operation
- Time functions (switch-on/switch-off delay)
- Extensive staircase light and impulse functions
- Status response (active/passive) for each channel
- Logical linking of binary data
- Extendend scene functions for each channel
- Central switching functions and block functions
- Adjustable behavior in case of bus voltage failure (AKK-01UP.01 only)
- Adjustable behavior in case of bus voltage return
- Flush mounted in an installation box
- Dimensions (W x H x D): 41mm x 41mm x 22mm
- Quick application download (long frame support for ETS5)
- Integrated bus coupling unit
- 3 years warranty
Technical specifications
- Number of outputs 1
- Ohmic load 16A
- Capacitive load 70uF
- Voltage 230VAC
- Maximum inrush current 300A/150µs 150A/600µs
- Incandescent lamps 2000W
- Halogen lamps 230V 2000W
- Halogen lamps, electronic transformer 1200W
- Fluorescent lamps, not compensated 1800W
- Fluorescent lamps, parallel comp. 800W
- Max. number of electronic transformers 10
- Output life expectancy (mechanical) 1.000.000
- Fuse protection 16A
- Specification KNX interface TP-256 with long frame support for ETS5
- Available application software ETS 4/5
- KNX busconnection terminal 0,8mm Ø, solid core
- Power supply KNX bus
- Power consumption KNX bus typ. <0,3W
- Operation temperature range 0 to + 45°C
- Enclosure IP 20
- Dimensions (W x H x D) 41mm x 41mm x 22mm
AKK-01UP.03
2 Items
Data sheet
- Type
- Accessories for Smarthome gateways
Gateways/Antennas
Module - Protocol
- IP
KNX
Specific References
No customer reviews for the moment.
-
Frequently purchased together
-
You might also like
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control.