Heiman - Z-Wave+ gas sensor
CHF46.90
Tax included
The Heiman gas sensor is designed to prevent the risks caused by a gas leak. If gas is detected, a sound alarm will be triggered and a Z-wave signal sent to the main control box.
Expert advice for over 14 years
Ordered before 5:00 p.m. = delivered within 24:00 p.m.
Official supplier chosen byover 60 manufacturers
The Heiman gas sensor is designed to prevent the risks caused by a gas leak. If gas is detected, a sound alarm will be triggered and a Z-wave signal sent to the main control box.
A range of different scenes can be created to be triggered by this warning.
Powered by mains electricity, the sensor can also serve as a repeater to extend its Z-wave network.
Features
- Sound alarm and Z-wave warning when unusually high gas levels are detected (Butane/Propane)
- Lower power consumption
- Repeater
- Automatic low battery report
- Easy installation
Technical Specifications
- Protocol: Z-Wave Plus (868,42MHz)
- Power supply: AC 100-240V
- Alarm: 75dB
- Operational voltage: 3V
- Operational current: 90mA
- Working temperature: -10°C to +50°C
- Radio range: 30m
- Dimensions: 68 x 75 x 76mm
- Weight: 90g
- Standards: EMC 2004/108/EC, R&TTE 1995/5/EC, LVD 2006/95/EC, FCC Part 15
HS1CG-Z
Data sheet
- Use
- Temperature/Humidity/CO2 Monitoring
- Type
- Sensor
- Function
- Gas Consumption
- Gateway compatibility
- Homey - total compatibility
eedomus+ - total compatibility - Protocol
- Z-Wave Serie 500
Specific References
No customer reviews for the moment.
-
Frequently purchased together
-
You might also like
The Heiman gas sensor is designed to prevent the risks caused by a gas leak. If gas is detected, a sound alarm will be triggered and a Z-wave signal sent to the main control box.