OMNIO - Occupancy sensor EOSCA
      OMNIO - Occupancy sensor EOSCA

      OMNIO - Occupancy sensor EOSCA

      Review (0)
      CHF195.10
      Tax included
      Stock status: Out of stock
      Out of stock
      Out-of-Stock

      The Omnio ceiling mounted occupancy sensor EOSCA-W-DECKE SOLARPIR is a battery-less and maintenance-free PIR motion sensor with 360 degree viewing angle lens for maximum efficiency in different room settings.

      Quantity :
      • Expert adviceExpert advice for over 14 years
      • Ordered before 5:00 p.m.Ordered before 5:00 p.m. = delivered within 24:00 p.m.
      • Official supplier chosen byOfficial supplier chosen byover 60 manufacturers

      Presentation

      The Omnio ceiling mounted occupancy sensor EOSCA-W-DECKE SOLARPIR is a battery-less and maintenance-free PIR motion sensor with 360 degree viewing angle lens for maximum efficiency in different room settings. It communicates wirelessly with other devices using the EnOcean wireless standard (EEP A5-07-01).

      Two integrated solar cells enable indoor light energy harvesting to power the device and eliminate the need for wires or batteries. In low light environments the device can be powered by an optional coin cell battery. Two molded buttons with LED indicator lights can be used to link and configure the device.

       

      Brief instruction

      Set the Omnio receiver in the programming mode according to its instruction manual

      Press LRN button of Omnio occupancy sensor

      Note : The occupancy sensor must not be further than 5 m away from the Omnio receiver

      Set the Omnio receiver in the operating mode

       

      Product Description

      The Omnio ceiling mounted occupancy sensor EOSCA-W-DECKE SOLARPIR is a battery-less and maintenance-free PIR motion sensor with 360 degree viewing angle lens for maximum efficiency in different room settings. It communicates wirelessly with other devices using the EnOcean wireless standard (EEP A5-07-01).

      Two integrated solar cells enable indoor light energy harvesting to power the device and eliminate the need for wires or batteries. In low light environments the device can be powered by an optional coin cell battery. Two molded buttons with LED indicator lights can be used to link and configure the device. 

       

      Operating elements

      1: Solar cells 
      2: 360° lens 
      3: SET button 
      4: LRN button 
      Battery compartment under the mounting lid on the back of the housing

       

      technical specifications

      • Power supply : 2 solar cells
      • Transmission range : max. 25 m
      • Installation height : 2.1 … 3 m
      • Motion sensor range : Ø 10 m
      • Startup charge time : 5 Min. @ 200 lux
      • Time to full charge : 25 hrs @ 200 lux
      • Sustaining charge time for battery free operation : 3 hrs @ 200 lux (per day)
      • Operating life in total darkness : 80 hours
      • Supplemental battery (optional) :  coin cell CR2032
      • Battery life
      • 200 lux for 2 hrs per day : 20 years
      • 65 lux for 5 hrs per day : 15 years
      • Total darkness : 6.5 years
      • Technology : EnOcean 868.3 MHz
      • EnOcean Equipment Profile (EEP) : A5-07-01
      • Environment : -10 … +40 °C, 20 ... 95 % rH non condensing
      • Dimensions : 160 x 60 x 37 mm
      • Protection class : IP20
      • weight : 125g
      • EC-Directives : RED 2014/53/EU, RoHS 2011/65/EU
      • Standards : EN 300328, EN 301489, EN 60950, EN 61000, EN 62479
      •  

       

       

      Omnio
      2151153

      Data sheet

      Use
      Fixture Control
      Lighting Control
      Type
      Module
      Function
      Actuator
      Protocol
      EnOcean

      Specific References

      Download

      2151153 - Manual - EN-DE

      2151153 - Manual - EN-DE

      Download (0)

      No customer reviews for the moment.

      Write your review
      OMNIO - Occupancy sensor EOSCA