Zooz Z-Wave+ Outdoor Motion Sensor ZSE70

This is the latest version of Zooz’s popular Z-Wave outdoor motion sensor. It’s an innovative sensor packed with features. You can rely on it for security and automation.

Install it on a flat, clean surface, add it to your Z-Wave hub, and set up notifications for unexpected activity. Use these reports to automate lights, sirens, or even sprinklers to scare off intruders.

The sensor also monitors light levels to help you fine-tune your smart lighting schedules. You’ll be able to customize its behavior and performance if your hub provides access to advanced settings.

Smarter Outdoor Lighting

Automate your outdoor lighting by pairing the motion sensor with any switch or dimmer from our lineup. Make sure the path to your front door or garage is well-lit after dark.

Add the sensor and your preferred switch to the hub using the convenient SmartStart method (just scan the QR code). Then create a smart rule so that the lights turn on whenever motion is detected in front of the garage or at the back door. It’s that simple!

Depending on your hub’s capabilities, you can build advanced scenarios to create the perfect motion-based rules for your daily routine.

Smarter Monitoring

The sensor gives you full flexibility in terms of functionality and installation. Use it exactly how you need, and get great results.

You’ll receive motion, light, and temperature reports on your hub at the frequency that suits you. Customize the reporting behavior in the advanced settings and use this valuable data to automate lights, HVAC equipment, and more.

Although the sensor is designed for outdoor use, it works just as well indoors. It’s small enough to fit in any room, and you can power it with the included batteries or via an optional 12-24 V low voltage supply. Make it your own!

Features of the Zooz Z-Wave+ 800 Series Outdoor Motion Sensor ZSE70

• Fast and reliable motion alerts to your Z-Wave hub
• Accurate temperature monitoring
• Lux sensor for smart lighting automation
• Z-Wave 800 series chip + SmartStart technology
• Battery or 12-24 V power with sealed terminals
• Works as a Z-Wave signal repeater when powered by 12-24 V AC/DC
• Designed for indoor or outdoor use

Technical Specifications of the Zooz Z-Wave+ 800 Series Outdoor Motion Sensor ZSE70

• Power: 2 x CR123A batteries (3 V) / 12-24 V AC/DC
• Motion detection: up to 9 meters
• Temperature range: -10°C to 50°C
• Accuracy: ±2°C
• Light detection range: 0 LUX to 30000 LUX with ±20% accuracy
• Dimensions: 5.94 x 6.1 x 6.1 / 5.94 x 6.1 x 6.9 cm
• Range: up to 40 m line of sight
• Installation and use: indoor or outdoor (IP66)