The RaZberry 2 is an expansion board that connects directly to the GPIO terminal of a Raspberry Pi board and turns it into a Z-Wave controller

The Aeon Labs Energy Consumption Meter for single-phase systems enables controlling the energy consumed or produced for the monitored phase. Not suitable for three-phase systems.

The Aeon Labs electricity consumption meter enables you to check the amount of electricity consumed throughout the home, even for a three-phase installation. This device runs on mains electricity.

This switch enables you to switch the two connected loads either manually as a conventional switch or remotely using wireless Z-Wave Protocol. 

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

FIBARO Wall Plug is a HomeKit-compatible smart plug that uses a Wi-Fi® connection and wireless Bluetooth® Low Energy technology.  Warning: This plug is not Swiss format.   

This unique type of jet type water meter can be used to measure the volume of cold water (30°C max). It is fitted with a reed type bulb (ILST) pulse emitter.

Z-Wave+ wireless actuator to commute charges of 3 A / 230 V. It is used to control hot water boilers or magnetic valves.

FIBARO Wall Plug (Type F) is a HomeKit-compatible smart plug that uses a Wi-Fi® connection and wireless Bluetooth® Low Energy technology.  Warning: This plug is not Swiss format.   

This switch enables you to control 4 connected loads, either manually as a conventional switch or remotely using wireless Z-Wave Protocol. 

The Danalock Universal Module V3 is the perfect solution for operating electronic devices such as garage doors and electronic locks with your smartphone.

This package includes the Secure SRT321 thermostat and the SSR303 receiver. It allows you to easily control your boiler. New version Z-wave+

FIBARO Walli Outlet is a smart outlet that allows you to control and manage the electric appliance connected to it. It is equipped with an LED ring, which informs you about the energy use. It can control a maximum load of 3680W (16A).

Pack including the FIBARO Radiator Thermostat (Homekit) and the Bluetooth temperature sensor.

The Heiman gas sensor is designed to prevent the risks caused by a gas leak. If gas is detected, a sound alarm will be triggered and a Z-wave signal sent to the main control box.

HELTUN Relay Switch Quinto is a Z-Wave Plus v2 enabled relay switch with 5 outputs mainly applied to control lights, wallplugs or electrical floor heating. Relay outputs (potential-free) can handle up to 5A (each) Inputs for External switches control Z-Wave Plus v2

The external power supply allows the permanent power supply of the Popp keyboard (POPE700045).

HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor Input for External switch control Z-Wave Plus v2

Z-Wave Touch Panel Switch, 1-5 channels. TPS01-05 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Five relay channels version

Z-Wave Touch Panel Switch, 1-5 channels. TPS01-05 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. For relay channels version

Z-Wave Touch Panel Switch, 3 channels. TPS03 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Three relay channels version

Z-Wave Touch Panel Switch, 2 channels. TPS02 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Two relay channels version

Z-Wave Touch Panel Switch, 1 channels. TPS01 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. One relay channel version