The KNX DMX 544 is a compact gateway between KNX and DMX512 with up to 64 freely configurable channels. DMX is a protocol for lighting control, particularly in the field of stage technology.

The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus.

The KNX IO 511.1 secure (1O2I) is a compact switching actuator with 1 bi-stable output and 2 binary inputs.

The KNX IO 534 CV (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 PWM outputs.

Il KNX IO 536 CC (4D) è un attuatore di dimmerazione RGB / RGBW / Tunable White compatto con 4 uscite (corrente costante).

The KNX IO 546.1 secure (1D1O) is a compact combined dimming/switching actuator with 1 dimming output for active electronic ballasts with a 0/1-10V interface and 1 bi-stable relay output.

The KNX IP Interface 731 is an interface between IP and KNX and can be used as programming interface for ETS® Software.

The KNX IP Router 751 forwards telegrams between different KNX TP lines via LAN (IP) as a fast backbone and is an alternative to KNX line coupler.

The KNX IP Router 752 secure enables the secure forwarding (routing) of telegrams between different lines over a LAN (IP, Ethernet) as a fast backbone.

The KNX Modbus TCP Gateway 716 is a compact Gateway between KNX TP and Modbus TCP with 250 freely configurable data points.

The KNX RF Blue IO 552 CV secure is a compact RGB / RGBW / Tunable White dimming actuator with 4 PWM outputs.

The KNX TP Blue IO 550 CV secure is a compact RGB / RGBW / Tunable White dimming actuator with 4 PWM outputs.

GCE Electronics - Calibration kit for pH probe. Essential for accurate measurements with the x200pH

All-new 800 series Z-Wave long-range radio USB key: incredible signal, ultra-secure and fast network!

The SMLIGHT SLZB-06p10 is a versatile Zigbee adapter designed to connect Zigbee devices to Ethernet, USB, and WiFi networks. Optimized for smart home environments, this adapter supports Zigbee2MQTT and Home Assistant (ZHA), providing an ideal solution for both professional and home IoT installations. Multi-connectivity : Easily switch between Ethernet, USB,...

The Stick Home Assistant Connect ZBT-1 is the easiest way to add Zigbee support to your Home Assistant instance and make it Matter ready. Note: The Connect ZBT-1 is the new model of the SkyConnect stick. Official supplier

SMLIGHT SLZB-06Mg24 is an adapter designed to integrate your Zigbee 3.0 devices into your network via Ethernet, WiFi, or USB connections. Official supplier

The SLZB-MR1 is an adapter that integrates the CC2652P7 and EFR32MG21 chips, enabling simultaneous management of Zigbee and Matter-over-Thread networks. Official supplier