Z-Wave Touch Panel Switch, 1-5 channels. TPS01-05 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Five relay channels version

Z-Wave Touch Panel Switch, 1-5 channels. TPS01-05 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. For relay channels version

HELTUN Fan Coil Thermostat is a Z-Wave Plus v2 (700 serie) enabled device for indoor temperature control mainly applied to control chiller and fan coil 2-pipe or 4-pipe systems. Attention: choose the color from the drop-down list below.

Z-Wave Touch Panel Switch, 2 channels. TPS02 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Two relay channels version

Mounting adapter for the quinto switch module or heavy load switch module to adapt them to standard DIN rails (width 50 mm). It can also be mounted directly on the wall using the screws and wall plugs provided.

The Heltun HT-01 Thermostat is a programmable room thermostat with an LCD screen, four touch buttons and several sensors (temperature, humidity, brightness) for optimal control of your heating. It is recommended to control electric heaters, boilers, heating mats or underfloor heating. Its 16A relay allows it to switch large loads. Attention: choose the color from the...

HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor Input for External switch control Z-Wave Plus v2

Z-Wave Touch Panel Switch, 3 channels. TPS03 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. Three relay channels version

Z-Wave Touch Panel Switch, 1 channels. TPS01 With advanced zero-cross technology, dry contacts and 5A load for each channel For lights, door locks, valves, and motorized devices control. One relay channel version

HELTUN Relay Switch Quinto is a Z-Wave Plus v2 enabled relay switch with 5 outputs mainly applied to control lights, wallplugs or electrical floor heating. Relay outputs (potential-free) can handle up to 5A (each) Inputs for External switches control Z-Wave Plus v2