The Omnio multi universal cable dimmer 1-channel KD230/10 is a device for dimming LED luminaires and other electrical loads. Thanks to automatic load recognition (R/L/C) the dimmer selects the right operating mode as well as the ideal dimming curve for the connected light source.

The Omnio flush mounted multi switching actuator 1-channel UPS230/08 is a device for switching electrical loads.. 

The Omnio flush mounted multi blind actuator 1-channel UPJ230/12 is a device to control 230 V~ tubular motors of blinds, sun blinds, awnings, sliding gates or garage doors

  25% smaller than any other wireless dimmer on the market Smarten up your conventional lighting and control your lights remotely with Qubino Mini Dimmer. Its small size allows an easy and fast installation. 

The TYXIA 2600 can control the lighting, lighting dimming, roller shutters, control systems and scenarios. It is compatible with the following control types: Single or double switch. Single or double push-button. 3-way roller shutter switch.

The Omnio handheld transmitter 4-channels R101 is a universally applicable battery-less and maintenance-free wireless switch with four independent individual keys. Due to its highly ergonomic shape it rests comfortably in ones hand. The power comes from a small energy converter based on the induction principle.

The Omnio DIN rail mounted multi switching actuator 4-channels REGS12/04 is a device for switching electrical loads. Its four potential free outputs are able to be actuated from up to 50 Omnio radio transmitters

The Omnio flush mounted push-button interface 2-channels TST230/10 a binary input device to integrate wired push-buttons, switches and sensors into the Omnio radio system. In addition this actuator can be used as repeater in case of range issues. Suitable for flush mounted sockets.

The Omnio ceiling mounted occupancy sensor EOSWA-W-WAND SOLARPIR is a battery-less and maintenance-free PIR motion sensor with both wide angle and long-range options for maximum efficiency and flexibility in different room settings. Two molded buttons with LED indicator lights can be used to link and configure the device.

The water sensor H20-ECO is aThe water sensor H20-ECO is a battery less, maintenance-free and wireless sensor to detect water. The water sensor H20-ECO is a battery less, maintenance-free and wireless sensor to detect water. A swelling device is attached on the lower side of the sensor

The CO2-sensor is a wired radio sensor to capture the concentration of carbon dioxide (400…2550 ppm) in the air. The measured values are transmitted wireless to Omnio gateways. It is particularly used to control the air quality indoors in offices, schools, hotels and residential premises. EnOcean Equipment Profile (EEP) A5-09-04.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The Omnio ceiling mounted occupancy sensor EOSCA-W-DECKE SOLARPIR is a battery-less and maintenance-free PIR motion sensor with 360 degree viewing angle lens for maximum efficiency in different room settings.

The Omnio wall mounted transmitter 1-channel wet WS-NASS-103-RW is a battery-less and maintenance-free transmitter including a push-button fitted in a cover of the switch and socket line “robusto” of the company Hager AG. A variety of different printed inlays (blank, doorbell symbol, light symbol) come with the delivery.

The Omnio wall mounted transmitter 1-channel wet WS-NASS-103-RW is a battery-less and maintenance-free transmitter including a push-button fitted in a cover of the switch and socket line “robusto” of the company Hager AG. A variety of different printed inlays (blank, doorbell symbol, light symbol) come with the delivery.

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio DIN rail mounted multi blind actuator 4-channels REGJ12/04 is a device to control 230 V~ tubular motors of blinds, sun blinds, awnings, sliding gates or garage doors

The Omnio flush mounted multi switching actuator 2-channels UPS230/12 is a device for switching electrical loads.