Introduction
This all-purpose siren alarm emits an audible alarm as well as flashing lights. The audible alarm may be chosen from among the following tones:
- Doorbell
- Arm/disarm
- Intruder
- Fire alarm
- Ambulance
- Police
When the siren receives a signal, it activates the alarm and flash, just the alarm, or just the flash.
The design of this siren allows for installation on any type of surface or wall mount so that a power cord can be hidden. A tamper switch lets you set off the alarm if someone tries to remove the siren. Furthermore, the siren is equipped with a backup battery in the event that it is deprived of electricity.
Functions
- 110dB Siren
- Z-Wave +
- 6 tones can be chosen
- Tamper switch
- Easy to install
- Low energy consumption
Technical Specifications
- Type: Z-Wave Slave
- Power: 5V
- Battery: 1150mAh
- Voltage: 868.42 MHz
- Radio range: 40m free field
- Volume of the Siren: 110dB
- Temperature for functioning: -10°C to 40°C
- Humidity for functioning: 85% maximum
- Dimensions: 110 x 110 x 19 mm
- Certifications: FCC part15.249 / EN300 220-1/
Specifications
| Use | Audible Warnings |
|---|---|
| Type | Audible Warnings |
| Function | Audible Warnings |
| Gateway compatibility | Fibaro Home Center - partial compatibility Homey - total compatibility eedomus+ - total compatibility |
| Protocol | Z-Wave Serie 500 |
Guides
ph-pse02 - Zipato Siren User Man
ph-pse02 - Zipato Siren User Manual v1.2 (1)_en
-
Frequently purchased together
-
You might also like