This switch enables you to switch the connected load either manually as a conventional switch or remotely using wireless Z-Wave Protocol. 

This switch enables you to switch the two connected loads either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

DIN Z-Wave+ module able to transmit the different control cable commands for an electric radiator.

The occupancy sensor detects the presence of (movement) of people. 

Z-Wave+ indoors surrounding temperature and humidity sensor

The myStrom Switch makes energy understable, palpable. You can see the energy that your appliances are using and how much it's costing you. The system enables wireless control over your equipment. <strong...

Enables six pre-programmed actions to be activated. Different scenarios can be launched by pressing the button between 1 and 5 times or by keeping the button pressed.

1-Wire DS18B20 waterproof temperature sensor

With MH9-CO 2 sensor by MCOHome, you can maintain good air quality in your room. 12VDC powered version.

The RaZberry 2 is an expansion board that connects directly to the GPIO terminal of a Raspberry Pi board and turns it into a Z-Wave controller

The PST02-1A sensor includes 4 different functions: motion sensor, opening sensor, temperature sensor and light sensor.

The X-Eno extension cord lets you add wireless, battery-less EnOcean technology to your IPX800 v4.

The Aeon Labs Energy Consumption Meter for single-phase systems enables controlling the energy consumed or produced for the monitored phase. Not suitable for three-phase systems.

The TZ55D-ZW5 switch allows you to dim or brighten any associated lighting, either manually like a conventional switch, or remotely via the Z-Wave+ wireless protocol.

The Aeon Labs electricity consumption meter enables you to check the amount of electricity consumed throughout the home, even for a three-phase installation. This device runs on mains electricity.

Standalone EnOcean temperature sensor (wireless, no battery needed) able to collect reliable precise information within a -30°C to +50°C range.

Somfy Home Alarm is a Smart, reliable and elegant security solution that detects any break-in attempt and warns...

This switch enables you to control 4 connected loads,&nbsp;either manually as a conventional switch or remotely using wireless Z-Wave Protocol.&nbsp;

In the event of a detection, this outdoor siren emits a loud 112 dB noise and bright flash to warn neighbors and prevent break-ins before they occur.

An all-in-one security solution with a built-in backup battery and 2 accessories included &nbsp;

The Doorbird A001 is both an alarm and a loud speaker, with a volume of up to 100 dB. It is easily connected to the IP Doorbird Birdguard B101 camera using the cable provided.

Use your doorbell wire to power and connect your Doorbird to the Ethernet network.

The FIBARO Radiator Thermostat is an intelligent thermostatic head that controls the temperature in your room, using a built-in or external sensor and regulating the heat level according to your individual preferences.

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.