HELTUN High Load Switch is a Z-Wave Plus v2 enabled relay switch output mainly applied to control lights, wallplugs or electrical floor heating. Relay output up to 16A Input for NTC temperature sensor Input for External switch control Z-Wave Plus v2

Reading and navigation helped with back-lit screen in 2 colours Battery life of 10 years for wireless version

Connected power consumption sensor: 1 power station Metering of 1 electrical station (heating, cooling, DHW or sockets) thanks to a TI Possibility of extending the installation and monitoring of consumption with our other compatible consumption sensors Display of consumption on the TYDOM iOS or Android application (no room unit required)

The benefits of using the Tybox 5300 Place the product freely: optimum temperature setting for comfort and savings Simply change the reversible mode and temperature of the thermostat Control and program with the app or voice assistant via the connected box

Pack including the FIBARO Radiator Thermostat (Z-wave+) and the Bluetooth temperature sensor.

Applied to control water heating system like: wall mounted boiler, water valve/pump, under floor pipes, radiator systems, etc; and electrical system like: heating cable, electro-thermal film, heating actuator, electrical globe valve etc.

Outdoor temperature sensor N/A

Receiver 16A supplied contact wired output Intuitive remote control and programming using the TYDOM application

Room thermostat for electric radiators Intuitive control of the heating on the thermostat Battery life of the thermostat of 10 years Scalable solution with the connected ecosystem Delta Dore via TYDOM and its connected home application

Underfloor Heating gateway receiver for Delta 8000 system Transforms the bus system to a wireless system (1 single receiver required by the system)

Technical unit for Delta 8000 system. Intuitive control and programming of heating with the thermostat Tydom and Lifedomus compatible

This wall sensor for Heatit thermostate accurately measures the air temperature. It has a sophisticated and elegant design.

Wireless accessory for electric heating (with a pilot wire) This accessory is ideal thanks to its wireless technology (no work required) Control your electric convectors remotely Control the status of your heating remotely or via the control screen

Reading and navigation helped with back-lit screen in 2 colours Battery life of 10 years for wireless version

With MH9-CO 2 sensor by MCOHome, you can maintain good air quality in your room. 230 VAC powered version.

Wireless accessory for underfloor heating management Install this accessory easily thanks to wireless technology (less work)

Receiver 16A supplied contact wired output Intuitive remote control and programming using the TYDOM application

Wireless programmable thermostat for hot water heating (batteries) Easily use this thermostat with its dial and backlit screen Avoid over-consumption thanks to a management of your heating without sudden variation Program your heating simply using registered and customizable preprograms Promote energy savings while keeping control of your comfort thanks...

Wired thermostat Simply use this thermostat thanks to its 3 buttons Control and program the thermostat remotely on your smartphone or tablet thanks to the Tydom range

Heatit Z-TRM6 is an electronic thermostat designed for electrical heating. The thermostat can be controlled through your Z-Wave network or via the buttons on the front. Max load 3600W (resistive load). User friendly interface. Internal room sensor. Active power metering. Floor sensor. Z-Wave 800 chip.

Pack including the FIBARO Radiator Thermostat (Homekit) and the Bluetooth temperature sensor.

This temperature sensor for the floor can be used with the Z-Wave Heatit Thermostat.

Reading and navigation assisted with backlit screen in 2 colours Fast access to different modes (Party, etc.)

Customisable programming for enhanced comfort on a daily basis Up to 25% savings on your heating bill Easy to use with its central selector

Dedicated to electric pilot wire radiators, the SIN-2-FP-01 EnOcean Module makes them connected and automates heating management to save energy.

PLC phase coupler for three-phase installation This accessory allows you to use a PLC heating programmer on a three-phase electrical installation

The benefits of using the Tybox 2300 Place the product freely: optimum temperature setting for comfort and savings Simply change on/off mode and thermostat temperature Control and program with the app or voice assistant via the connected box