The 1-channel modular receiver receives and processes radio signals from transmitters or sensors within its range to switch LED and compact fluorescent lighting loads.

The 2 channel modular receiver receives and processes radio signals from transmitters or sensors within its range to switch LED and compact fluorescent lighting loads.

The ENOCEAN 1-channel modular mixed remote switch receiver with timer is used to switch various 230V load electrical devices from an ENOCEAN radio transmitter or sensor without batteries and wires or wired push button

The 1-channel 16A modular receiver receives and processes radio signals from transmitters or sensors within its range to switch large electrical loads.

The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus.

The X-Eno extension cord lets you add wireless, battery-less EnOcean technology to your IPX800 v4.

Remote antenna for 868MHz signal amplification. Can be used in an EnOcean system to improve signal range.

Energy consumption monitoring and management RT2 Eco-devices. One single product to supervise everything.    

The Omnio flush mounted multi switching actuator 1-channel UPS230/10 is a device for switching electrical loads. Its potential free output is able to be controlled by up to 50 Omnio radio transmitters.

The Omnio flush mounted multi switching actuator 2-channels UPS230/12 is a device for switching electrical loads. 

The Omnio DIN rail mounted multi blind actuator 4-channels REGJ12/04 is a device to control 230 V~ tubular motors of blinds, sun blinds, awnings, sliding gates or garage doors

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio flush mounted push-button interface 2-channels TST230/10 a binary input device to integrate wired push-buttons, switches and sensors into the Omnio radio system. In addition this actuator can be used as repeater in case of range issues. Suitable for flush mounted sockets.

The Omnio DIN rail mounted multi switching actuator 4-channels REGS12/04 is a device for switching electrical loads. Its four potential free outputs are able to be actuated from up to 50 Omnio radio transmitters

The Omnio flush mounted multi blind actuator 1-channel UPJ230/12 is a device to control 230 V~ tubular motors of blinds, sun blinds, awnings, sliding gates or garage doors

The Omnio flush mounted multi switching actuator 1-channel UPS230/08 is a device for switching electrical loads.. 

The RF Pulse allows the transmission, via Enocean technology, of the indexes of 2 pulse meters as well as various information from the electricity meter thanks to customer remote information. (historical and standard mode).

the SecuSignal window handle fromHoppe is a battery-free, maintenance-free EnOcean radio transmitter that monitors the status of a window or door. Toulon - 0737/EN-409 Aluminum HOPPE window handle with transmitter SecuSignal®, Secustik® and VarioFit® for window with tilt-opening

The mixed remote switch receiver is used to switch various electrical devices from wired pushbuttons or from EnOcean wireless switches.

2-channel shutter management actuator with two inputs for conventional shutter push buttons, two electronic outputs 230 V~ / 2 A, power supply voltage 230 V

The occupancy sensor detects the presence of (movement) of people. 

Standalone EnOcean temperature sensor (wireless, no battery needed) able to collect reliable precise information within a -30°C to +50°C range.

This EnOcean sensor is compatible with the EnOcean Smart Home & Smart Building protocol and can automatically detect any movement.

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line