The TZ55D-ZW5 switch allows you to dim or brighten any associated lighting, either manually like a conventional switch, or remotely via the Z-Wave+ wireless protocol.

Fibaro - ON/OFF socket with energy consumption monitoring (French format) FGWPE-102 -ZW5 Warning: This plug is not Swiss format. 

This switch enables you to control 4 connected loads, either manually as a conventional switch or remotely using wireless Z-Wave Protocol. 

This switch enables you to switch the two connected loads either manually as a conventional switch or remotely using wireless Z-Wave Protocol.

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control.

Introducing the new Smart Thermostat (v3): More comfort, better control and platform connectivity. If you own a Smart Thermostat - Starter Kit or a Smart Radiator Thermostat - Starter Kit of any version (V2/V3/V3+) then you can supplement these with additional Smart Thermostats to independently control multiple zones.

The Danalock Universal Module V3 is the perfect solution for operating electronic devices such as garage doors and electronic locks with your smartphone.

This package includes the Secure SRT321 thermostat and the SSR303 receiver. It allows you to easily control your boiler. New version Z-wave+

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 4-channels WS-CH-102 is a battery-less and maintenance-free transmitter including a single and double rockers with centre position compatible with the switch product ranges of Feller EDIZIOdue, ABB Sidus and Hager kallysto.line

The Omnio wall mounted transmitter 1-channel wet WS-NASS-103-RW is a battery-less and maintenance-free transmitter including a push-button fitted in a cover of the switch and socket line “robusto” of the company Hager AG. A variety of different printed inlays (blank, doorbell symbol, light symbol) come with the delivery.

The Omnio ceiling mounted occupancy sensor EOSCA-W-DECKE SOLARPIR is a battery-less and maintenance-free PIR motion sensor with 360 degree viewing angle lens for maximum efficiency in different room settings.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The Omnio window contact 1-channel FK101 is a battery-less and maintenance-free radio transmitter to monitor the condition of windows and doors. The window contact FK101 consists of a transmitter module driven by its own solar cell and a small counter magnet and can be fixed on window- and door frames made of wood, glass and aluminium.

The CO2-sensor is a wired radio sensor to capture the concentration of carbon dioxide (400…2550 ppm) in the air. The measured values are transmitted wireless to Omnio gateways. It is particularly used to control the air quality indoors in offices, schools, hotels and residential premises. EnOcean Equipment Profile (EEP) A5-09-04.

The water sensor H20-ECO is aThe water sensor H20-ECO is a battery less, maintenance-free and wireless sensor to detect water. The water sensor H20-ECO is a battery less, maintenance-free and wireless sensor to detect water. A swelling device is attached on the lower side of the sensor

The Omnio ceiling mounted occupancy sensor EOSWA-W-WAND SOLARPIR is a battery-less and maintenance-free PIR motion sensor with both wide angle and long-range options for maximum efficiency and flexibility in different room settings. Two molded buttons with LED indicator lights can be used to link and configure the device.

The Omnio flush mounted push-button interface 2-channels TST230/10 a binary input device to integrate wired push-buttons, switches and sensors into the Omnio radio system. In addition this actuator can be used as repeater in case of range issues. Suitable for flush mounted sockets.

Introducing the new Smart Thermostat - Starter Kit (v3): More comfort, better control and platform connectivity. Incl. Extenion Kit

The Omnio multi universal cable dimmer 1-channel KD230/10 is a device for dimming LED luminaires and other electrical loads. Thanks to automatic load recognition (R/L/C) the dimmer selects the right operating mode as well as the ideal dimming curve for the connected light source.

The Heiman gas sensor is designed to prevent the risks caused by a gas leak. If gas is detected, a sound alarm will be triggered and a Z-wave signal sent to the main control box.

No more keys, use your smartphone to lock and unlock your door! Z-Wave and Bluetooth model.

No more keys, use your smartphone to lock and unlock your door! Bluetooth and Zigbee model.

HELTUN Relay Switch Quinto is a Z-Wave Plus v2 enabled relay switch with 5 outputs mainly applied to control lights, wallplugs or electrical floor heating. Relay outputs (potential-free) can handle up to 5A (each) Inputs for External switches control Z-Wave Plus v2