Philio - Z-Wave+ 3-in-1 Sensor (Flood, Temperature, Humidity) PAT02-A
CHF64.90
Tax included
The Philio PAT02 enables a flood to be detected and the measurement of temperature and humidity using a single device connected to your Z-Wave network.
In stock. Ordered before 5pm, delivered the next business day.
Philio Pat02 - temperature, humidity and flood detection
The Philio PAT02 flood sensor sends a Z-Wave signal when flooding or a leak is detected. But it does far more than that and can also transmit information on temperature and humidity levels.
The device can be fitted to any flat surface. It can be installed either using screws or double-sided adhesive.
FEATURES
- Flood, temperature, humidity
- Z-Wave 500 Series chip enabling multi-channel operation and significantly higher speeds (9.6/40/100kbps)
- High sensitivity flood detection
- Can be fitted using double-sided tape, or screws (included in the box)
- Self-protect contact
- OTA firmware update possible
- Low power consumption (battery lifetime approx. 7 years)
- Easy installation
TECHNICAL SPECIFICATIONS
- Type: Z-Wave Plus transmitter (868.42MHz)
- Power supply: CR123A Lithium battery
- Operational voltage: 3V
- Operational current: 35mA
- Operational temperature: -10°C - +40°C
- Temperature sensor: -10°C - +40°C
- Humidity sensor: 0 - 80%
- Radio range: 40m indoors
- Dimensions: 22 x 27 x 127 mm
- Weight: 55g
- Certifications: EMC 2004/108/EC, R&TTE 1995/5/EC, LVD 2006/95/EC, FCC Part 15
-
Frequently purchased together
-
You might also like
