The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is...

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 2 independent electrical loads . Each output uses relay (AKK-01UP.03: bistable relais, AKK-02UP.03: monostable relais). The outputs are parameterized individually via ETS. The device provides extensive functions like...

The MDT Time switch with 20 channels (6 cycle times each channel) has a daily/weekly/astro switching function and an adequate power reserve if the bus voltage fails. The cycle times of the single channels are adjustable by the ETS or can be set directly at the device. The large LCD display for comfortable handling allows direct switching of the 20 channels (Manual Mode).

The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.

The MDT Glass Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitoring. The brightness of the room is measured by the integrated light sensor and made available as an object.

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is...